Emergency Board-Up & Tarp
If a roof, window or wall is open, we secure it before anything else. That stops more water and debris from getting in and protects your contents while we scope the job.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
9+ Years Trusted in Dallas
What Our Commercial Restoration Service Includes
Every commercial restoration job we run in Dallas includes the full path from emergency response to final walkthrough. Here is what is covered by default, and what we quote separately if your property needs it.
Water Extraction & Drying
Truck-mounted extraction units pull standing water, then Dri-Eaz dehumidifiers and air movers dry the structure. We log moisture readings daily and adjust equipment until the building hits dry standard.
Moisture Mapping & Documentation
A moisture meter, thermal imaging camera and boroscope camera find hidden water behind walls and under floors. Every reading and photo goes into the file your adjuster needs.
Mold Remediation
If mold is present, we contain the area, remove affected material and treat surfaces under our Texas Mold Remediation License, then verify clearance with post-remediation testing.
Structural Rebuild
Drywall, insulation, plywood, flooring, paint and trim go back in permitted and inspected through the City of Dallas. You reopen to a building that passes inspection and holds up with your insurer.
Odor & Air Treatment
Smoke, sewage and mildew odors get treated at the source with HEPA vacuums, ozone generators and encapsulant, not covered up with fragrance. Your staff and customers walk into clean air.
What Commercial Restoration Dallas TX Actually Involves
Commercial Restoration Dallas TX is the full-scope repair and rebuild of a business property after water, fire, mold, sewage or storm damage. It is not a mop-and-fan job. We map moisture with a thermal imaging camera and a moisture meter, pull standing water with truck-mounted extraction units, then dry the structure with Dri-Eaz dehumidifiers and air movers until readings match a dry standard. Damaged drywall, insulation, plywood and ceiling tile come out, get documented, and go back in code-correct.
Most Dallas calls we run start the same way: a supply line fails overnight, a roof leak shows up after a spring hailstorm, or a slab leak soaks a retail floor before anyone notices. Water wicks into drywall and insulation within hours, and mold growth can start inside 24 to 48 hours. That is why we treat every commercial water damage restoration Dallas TX job as a clock, not a project. One call to (469) 895-3421 and we are moving.
How Our Commercial Restoration Process Runs
Every job follows the same five stages, whether it is a 1,200 sq ft cafe or a 40,000 sq ft warehouse. You get a written scope, daily readings and a single point of contact from emergency call to final walkthrough.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and Methods We Use
Tools & Equipment
Thermal Imaging Camera
Finds hidden water behind walls, under floors and above ceilings without tearing the building apart. We use it on every scope walk to map the true extent of the loss.
Moisture Meter
Reads moisture content in drywall, wood and concrete so we know when the structure is actually dry, not just dry to the touch. Daily readings go into your file.
Dri-Eaz Dehumidifiers & Air Movers
The workhorses of structural drying. We size the equipment count to the square footage and run it until readings hit dry standard, usually in 3 to 5 days.
Water Extraction Unit
Truck-mounted extraction pulls hundreds of gallons of standing water fast, cutting the drying window and limiting how far water wicks into your building.
Boroscope Camera
Slides into wall cavities to inspect framing, insulation and hidden mold growth without opening up the whole wall. It tells us exactly where to cut.
Ozone Generator & HEPA Vacuum
Removes smoke, sewage and mildew odors at the source. HEPA vacuums capture fine particles, and ozone treatment neutralizes odor molecules in the air and on surfaces.
Hydrostatic Test Pump
Pressurizes plumbing lines to confirm a slab leak before we open the floor. It saves you from tearing up concrete on a guess.
Methods & Standards
IICRC S500 Drying Standard
We follow the IICRC S500 standard for water damage restoration, which sets the drying goals, equipment calculations and documentation requirements for every job. That is why our drying logs hold up with adjusters and why the building actually dries.
Xactimate Estimating
Every scope is written in Xactimate, the same estimating platform most carriers use. Line items match what your adjuster expects, so the claim moves faster and you are not stuck explaining charges.
TDLR-Compliant Mold Remediation
Mold work runs under our Texas Mold Remediation License and follows TDLR rules for containment, removal and clearance. Post-remediation verification confirms the space is clean before rebuild.
Permitted Rebuild Through City of Dallas
Structural repairs are permitted and inspected through the City of Dallas. We pull the permits, schedule the inspections and hand you a building that is legal, insurable and code-correct.
When Dallas Businesses Call Us
01
A frozen pipe bursts in a 6,000 sq ft office building over a January cold snap.
What we do: We dispatch overnight, shut off the supply, extract standing water and set drying equipment across the affected suites. Daily moisture readings track progress, and we repair the failed line and rebuild drywall and carpet.
→ The building is dry in four days and back to full occupancy inside two weeks, with a clean claim file for the property owner.
02
A restaurant kitchen floods after a commercial dishwasher line fails on a Saturday night.
What we do: We extract the water, pull up the affected flooring, dry the subfloor and treat the area with antimicrobial spray. Rebuild happens the following week so the kitchen can reopen without a long closure.
→ The restaurant misses two service days instead of two weeks, and the health inspection passes on the first visit.
03
A spring hailstorm punches through a warehouse roof and soaks 8,000 sq ft of inventory space.
What we do: We tarp the roof, extract the water, dry the concrete floor and racking area, and check for mold before restocking. Then we rebuild the roof section and interior ceiling.
→ Inventory losses stay under 5 percent, and the warehouse is back to full operation in under three weeks.
04
A retail store in ZIP 75230 discovers mold behind a wall after a slow roof leak.
What we do: We contain the area, remove affected drywall and insulation, treat framing under our Texas Mold Remediation License, and rebuild the wall. Post-remediation testing confirms clearance.
→ The store stays open during most of the work and reopens the affected section with verified clean air.
How Commercial Restoration Runs in Dallas
Neighborhoods We Serve
-
Downtown Dallas
Older high-rises and mixed-use buildings with complex plumbing risers. Water losses here often travel between floors before anyone notices.
-
Design District
A mix of converted warehouses and newer retail. Flat roofs and exposed ductwork make roof leaks and HVAC condensation common calls.
-
Oak Lawn
Mid-century commercial buildings with original copper and cast-iron lines. Pinhole leaks and slab leaks show up regularly on these properties.
-
Deep Ellum
Historic brick buildings with tight tenant spaces. Water travels through shared walls, so a leak in one unit often hits two or three neighbors.
-
North Dallas
Larger office and retail centers with flat roofs and heavy HVAC. Storm and roof leak claims dominate our spring and summer call volume here.
Local Conditions We Plan For
-
Expansive clay soil under Dallas slabs
Soil movement cracks supply and drain lines under commercial slabs, driving slab leak calls year-round. We locate the leak with a hydrostatic test pump before opening any concrete.
-
Summer heat and heavy HVAC run times
Condensation in attics and mechanical rooms soaks insulation and ceiling tile. We see these losses peak from June through September across Dallas County.
-
Winter freeze events on exposed pipes
A hard freeze can burst multiple lines in one building overnight. We staff up for these events and dispatch crews in waves to keep response times short.
-
Spring hail and high-wind storms
Roof damage opens buildings to water intrusion fast. We tarp and board first, then scope the interior damage once the weather clears.
Office Building Reopens After Frozen Pipe
Commercial Problems We Solve in Dallas
Most commercial losses we see in Dallas start small and get expensive fast. Here are the ones we get called for most, and what happens if they sit.
Problem
Burst pipe floods an office overnight
Water wicks into drywall, insulation and carpet within hours, and mold growth can begin inside 24 to 48 hours. Every day of delay adds material replacement and downtime.
Our Fix
We dispatch immediately, stop the source, extract standing water and set drying equipment the same day. Then we repair the failed line and rebuild what the water damaged, documented for your insurer.
Problem
Roof leak soaks ceiling tile and insulation
A slow roof leak can run for weeks before a stained ceiling tile shows up. By then, insulation is saturated and mold has a foothold above your workspace.
Our Fix
We trace the leak with a moisture meter and thermal imaging camera, dry the structure, remove saturated material, and rebuild the ceiling and roof section so the problem does not come back.
Problem
Sewage backup contaminates a retail floor
Category 3 water carries bacteria and pathogens. Anything porous it touches has to come out, and staff or customers exposed to it face real health risk.
Our Fix
We remove contaminated material, disinfect with antimicrobial spray, dry the structure and rebuild to code. Post-cleanup verification confirms the space is safe before you reopen.
Problem
Slab leak ruins flooring in a Dallas storefront
Dallas clay soil shifts and cracks slabs, and a slab leak can soak flooring and baseboards for weeks. Left alone, it warps floors and drives mold under the slab edge.
Our Fix
We locate the leak with a hydrostatic test pump, dry the affected slab and flooring, then rebuild once the line is repaired. You get a documented dry standard before new flooring goes down.
Why Dallas Businesses Call Us First
Downtime costs more than the repair. Every hour a Dallas storefront, kitchen or office sits closed is revenue you never get back. Here is what our commercial restoration work is built to protect.
-
Faster Reopening
We stage drying equipment the same day and run 24-hour monitoring, so most water-loss jobs hit dry standard in 3 to 5 days instead of two weeks. That is the difference between losing a weekend of sales and losing a month.
-
Insurance Paperwork Handled
We document with moisture readings, thermal images and Xactimate line items your adjuster already recognizes. You get a clean claim file, and we bill the carrier directly so you are not fronting the whole job out of pocket.
-
Code-Correct Rebuilds
Repairs are permitted and inspected through the City of Dallas, from PVC and PEX supply lines to drywall joint compound and encapsulant on affected framing. You reopen legal, inspected and insurable, not patched over.
-
One Crew, Whole Job
Extraction, drying, mold remediation, smoke odor removal and rebuild all run under one roof. No juggling three contractors or waiting on a sub who never shows. You make one call and we own the result.
Licensed, Certified, Documented
Licensed & Certified
- IICRC WRT (Water Damage Restoration Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
- IICRC ASD (Applied Structural Drying) — issued by Institute of Inspection, Cleaning and Restoration Certification
- IICRC AMRT (Applied Microbial Remediation Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
- Texas Mold Remediation License — issued by Texas Department of Licensing and Regulation (TDLR)
- EPA Lead-Safe Certified Firm — issued by U.S. Environmental Protection Agency
Verified Reviews
Google ★★★★★4.9
Called them at 11 p.m. when a pipe burst in our office. Crew was on site in about an hour, water was out, and drying equipment was running before midnight. They handled the insurance paperwork and we reopened in 10 days.
Yelp ★★★★★4.8
They found a slab leak we had been chasing for weeks. Hydrostatic test confirmed it, they dried the flooring, and the rebuild was clean. No surprise charges, and they walked me through every reading.
BBB ★★★★★4.9
After a hailstorm opened our warehouse roof, they tarped it the same day and dried 8,000 square feet in four days. Straight answers, licensed crew, and the mold check came back clean before we restocked.
Google ★★★★★5.0
Mold behind a wall from a slow roof leak. They contained it, removed the affected drywall, treated the framing, and tested for clearance. Professional from start to finish, and they kept the store open during most of the work.
Nine Years Restoring Dallas Commercial Property
Dallas Home Mold Water Fire Damage has been restoring commercial property since 2017, and in nine years we have handled everything from a 900 sq ft boutique on a slab leak to multi-tenant office buildings after a frozen-pipe event. Our technicians carry IICRC WRT, IICRC ASD and IICRC AMRT certifications, plus OSHA 10 and EPA Lead-Safe credentials, and we work to TDLR standards on every mold job. That training is why our drying logs hold up with adjusters and why our rebuilds pass City of Dallas inspection the first time.
- IICRC WRT and ASD certified technicians running every water-loss drying project
- IICRC AMRT certified for mold remediation under Texas Mold Remediation License
- OSHA 10 trained crews on every commercial jobsite, including occupied buildings
- EPA Lead-Safe certified for pre-1978 Dallas commercial and mixed-use buildings
- Xactimate estimating so adjusters get line items they can approve fast
What Dallas Clients Say
Real experiences from customers who chose our Commercial Restoration services.
“A supply line under our dish station let go on a Friday night. They were on site in about an hour, pulled the water and had drying equipment running before we closed out the night. We were back serving by Tuesday. The Xactimate paperwork made our insurance claim painless.”
M
Marcus T.
Restaurant Owner, Downtown Dallas
“We had a slab leak soak three tenant suites in one building. Their crew mapped the moisture with a thermal camera, showed me exactly where the water had traveled, and rebuilt the drywall and flooring after the plumber fixed the line. Clean work, and they kept me updated daily.”
P
Priya R.
Property Manager, 75231
“A spring hailstorm opened up our roof and soaked about 8,000 square feet of inventory space. They tarped, extracted and dried the whole floor in four days, then handled the mold check before we restocked. Straight answers and no surprise charges on the invoice.”
D
Dwight K.
Warehouse Operations, Dallas County
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does commercial restoration cost in Dallas TX?
Most commercial water-loss jobs in Dallas run $2,500 to $12,000 for drying and basic repairs, while fire or mold jobs with rebuild often land $15,000 to $60,000 depending on square footage. The biggest cost drivers are how long the water sat, how much material has to come out, and whether the rebuild touches electrical or HVAC. We give you a written scope and price before work starts.
Does business insurance cover commercial water damage in Dallas Texas?
Yes, most commercial property policies in Dallas cover sudden water damage from burst pipes, appliance failures and storm intrusion. What usually is not covered is long-term seepage you could have caught earlier. We document everything with moisture readings and photos, work from Xactimate line items, and bill your carrier directly so the claim moves.
How long does commercial restoration take in Dallas?
Drying typically takes 3 to 5 days, and a full rebuild after water damage runs 1 to 3 weeks depending on scope. Fire and mold jobs with structural rebuild often take 3 to 6 weeks. We give you a stage-by-stage schedule at the start and update it as readings come in, so you can plan staffing and reopening.
Can you restore my business after water damage in Dallas TX?
Yes. We handle extraction, structural drying, mold remediation and the rebuild, so your business reopens under one contractor. For a 24/7 commercial water damage restoration near me Dallas TX call, we dispatch immediately and most Dallas addresses see a crew within 60 to 90 minutes. We work nights and weekends to keep your downtime short.
Related Services
Water Damage Restoration
The core of most commercial claims we run in Dallas. Extraction, structural drying and moisture mapping for offices, retail and warehouses, with daily readings until the building hits dry standard.
View Water Damage RestorationEmergency Water Removal
When a supply line lets go at 2 a.m., we pull standing water fast with truck-mounted extraction units. Every hour counts before water wicks into drywall and insulation on your Dallas property.
View Emergency Water RemovalMold Remediation
Mold can start inside 24 to 48 hours after a leak. We contain the area, remove affected material and treat framing under our Texas Mold Remediation License, then clear it with post-remediation verification.
View Mold RemediationMold Testing & Inspection
Air and surface sampling tells you whether a musty smell in your Dallas building is active mold or just stale air. We use lab results to scope the work and prove clearance when we are done.
View Mold Testing & InspectionFire & Smoke Damage Restoration
After a commercial fire, smoke odor and soot travel through HVAC and into every porous surface. We board up, clean, run ozone generators and rebuild so your Dallas business can reopen.
View Fire & Smoke Damage RestorationSewage Cleanup
A backed-up main or failed lift station is a Category 3 loss. We remove contaminated material, disinfect with antimicrobial spray and rebuild to code, protecting your staff and your Dallas customers.
View Sewage CleanupGet Help Now
Call (469) 895-3421 any time, day or night. A live person answers, not a machine. We dispatch crews 24/7 across Dallas and the surrounding metro, and we average under 60 minutes to arrive. If you prefer email, reach us at info@dallashomemoldwaterfiredamage.com and we will respond the same day.
Dallas Home Mold Water Fire Damage
-
Phone
(469) 895-3421 -
Address
3924 Sandshell Dr #5800, Fort Worth, TX 76137, Dallas, Texas
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available